27
Operation of Bed
WARNING:
Failure to heed the warnings pertaining to the operation of the bed
could result in patient and/or user injury as well as damage to equipment or other
property.
Never work under the bed while it is in operation.
Casters will move/roll when the bed is in motion. Stand clear of the bed frame
before operating.
Keep fingers and arms away from rotating parts when mechanisms are moving.
Operating this bed with any part of the body in the frame can result in injury.
Stand clear of the bed frame before operating.
Stand clear of the bed during operation due to minimum floor clearance on all
sides of the bed.
The bed is for indoor use only. Only operate the bed on a flat surface.
DO NOT use the bed near an open flame or an extreme heat source.
This bed is not intended for use in high moisture areas (e.g. showers, pool
therapy), or extreme temperature environments.
Use only parts, accessories and adapters authorized by the manufacturer.
DO NOT use the bed with any unintentionally missing or abnormal parts.
Remove the hand control when the patient is unattended.
WARNING:
Make sure all cords are properly positioned before operating the
bed. Failure to do so could result in electrical shock and serious injury.
Never work on a bed while it is plugged into an electrical outlet.
DO NOT use the bed if the power cord is cut, frayed or loosely connected to the
bed.
The bed is an electrically powered mechanism. Electrical hazard may occur if the
bed is plugged into inadequate power supply. Make sure the bed is plugged into
an 115V grounded outlet.
HAZARD:
Never let fingers or other body parts come between moving parts
when operating the bed. Doing so may cause a pinch or crush type injury.
