17
Bed Set-Up
1.
Position both ends of the bed so that the sections are lined
up with each other.
2.
Insert a 5/16”-18 x 2 1/2” long Grade 8 bolt (A) in the
bottom holes, 2 places. Lift both sections of the bed
and insert the brackets (B) on section A, behind the
bolts on section B. Slowly lower the two sections.
NOTE
: For ease of assembly it may be necessary to
have two people assemble the bed.
3.
Install the 5/16”-18 x 2 1/2” long Grade 8 bolts (C)
through the top holes on the brackets to lock the two
sections together. Install and tighten the nuts on the 4
bolts.
WARNING:
Failure to securely fasten the
four bolts in place during bed set-up could
result in patient or user injury as well as damage
to equipment or other property
4.
The headboard mount should be bolted
onto the bed frame on the outer
receptacles.
The footboard mount should be bolted
onto the bed frame on inner receptacles.
5.
Locate the electrical connectors in the middle of the bed
frame and insert them together.
