20
To Mount:
1. Align the side rail mount with the two pre-drilled holes (A),
located toward the center of the top deck, and place the bolts
through the holes.
2. Place the nut on the bolt underneath the deck and tighten.
3. Slide the side rail into the mount (B).
4. Place the pin and lanyard (C) below the mount to secure the
side rail.
NOTE
: Side rails for the head section are side specific. Verify the angle indicators are toward
the center of the bed.
WARNING:
If the side rails are not secured in the proper place, entrapment to
the patient may occur. Bed rail entrapment is a serious health risk that can result
in serious injury or even death. Sizewise recommends the care provider be
mindful of the FDA guidelines relevant to bed rail entrapment, as serious injury
can result. These guidelines can be found on the FDA website. It is the care
provider’s ultimate decision whether or not to use bed rails with the patient.
