sitrex TR/6-S, Assembly, Use And Maintenance

Page: 35 / 48

35
Pos. Qty. Description Operation Every x hours
1 3 Wheel support Lubricate 25
2 1 Frame Lubricate 25
3 6-7-8-9 Rake wheel arms Lubricate 16
4 6-7-8-9 Rake wheel hubs Lubricate 16
5 2 Opening cylinder shaft Clean-brush grease A
6 1 Rake wheel lifting cylinder shaft Clean-brush grease A
7 1 Pirouetting wheel brake Check effectiveness B
8 3 Tires Check pressure C
9 *
Grease type: NLGI 1
A: Exposure to atmospheric agents subjects these parts to rusting, therefore each time
the machine is inactive for long periods (especially during the winter) brush the
cylinder shafts with grease. When possible keep the cylinders closed so that a
minimum amount of shaft is outside the cylinder barrel.
B: The wheels must pirouette freely, but without becoming uncontrollable. Check
the wear of the disks each season. (To adjust the brake, see machine use.)
C: Check the tire pressure each time the machine is used, especially after long periods
of inactivity. Bring the tires to the right pressure if necessary, according to the
indication on the tires.
5) MAINTENANCE POINTS AND INSTRUCTIONS
Do the first general check after 8 working hours. Check
carefully the stability of the coupling of nuts and bolts, pins,
clips, tire pressure, etc. After this do a check every 50 working
hours.