sitrex TR/6-S, Assembly, Use And Maintenance

Page: 33 / 48

33
16) DANGER
Hook X on spring 1 is more closed than hook Y. Hook Y (the more open one)
should be inserted into hole Z in the lever of arms 2-3 (RH-LH).
First of all pass chain K, which is screwed onto the rake wheel lifting pipes,
through the spring 1. Then attach hook Y on spring 1 to hole Z in the lever of arms
2-3. Hook the 9th link of chain K (counting from that screwed onto the rake wheel
lifting pipes) to hook X on spring 1. Hook the last link V of chain K onto U-bolt 4,
then hook the 24th link of chain K (the 6th from the end), again by means of U-bolt
4, to hole J in the lever of arms 2-3. That described is the standard assembly of
chain K to spring 1. For working adjustments, see machine use.
In this step, you will use:
Item 1: 6-7-8-9 springs ø7-56x276 (ø0.27”-2.2”x10.87”)
Item 4: 6-7-8-9 U-bolts M8 (0.31”)
The assembly is now completed. The machine is ready to be lubricated and then
used.