sitrex TR/6-S, Assembly, Use And Maintenance

Page: 21 / 48

21
10) DANGER
For TR/7-9 only
Check to make sure the manufacturer has correctly secured the bushings B with
retaining rings C on brackets A on all the sections.
Pipe 1 is inserted starting from bracket A at the front of the machine, while pipes 2-
3-4 are inserted from bracket A at the back of the machine.
At the same time the
bushings with chain 5 must be put on the pipes at the positions shown (205 mm –
8.1” from bracket A). Join pipe 1 to pin D using bolt 8 and nut 9. Join pipe 2 to pin
D using bolt 8 and nut 9. Join pipe 3 to pipe 2 using pin 6 ,bolts 8 and nuts 9. Join
pipe 4 to pipe 3 using pin 6 ,bolts 8 and nuts 9.
At this point fasten the bushings with chain 5 to the pipes 1-2-3-4 at the position
indicated using bolts 7.
In this step, you will use:
Item 6: n° 1-2 pins ø22-35x198 (ø0.877”-1.38”x7.8”)
Item 7: n° 7-9 bolts M10x25 (0.39” x 1”)
Item 8: n° 6-10 bolts M8x45 (0.31”x1.77”)
Item 9: n° 6-10 nuts M8 (0.31”)