Siruba ASP-EBJ100, Instruction Book

Page: 24 / 56

重疊量
LAPPING
SIZE
Indicator Status Description Solution
STOP
①
ON EMERGENCY
⑤
pressed A1
BAND
②
ON
1. Band runs out.
2. Bad joint detected A2
A3
Flashing
1. Feeding malfunctions
2. Problem other than devices, i.e. band falls off. A4
A5
COUNTER
④
ON Work reaches the setting target A6
STOP
①
THREAD
③
Both
Flashing
Sewing machine is not ready. A7
STOP
①
BAND
②
Both
Flashing
Limit Switch malfunctions A8
TROUBLE SHOOTING
⑤ ⑥ ⑦
④ ⑩ ⑧ ⑨ ③ ② ①
Operation Panel Sewing Machine Operation Panel
Solution A1: To disarm Emergency
1. Release EMERGENCY stop
⑤
by rotating and pulling up.
2. Press RESET
⑧
to turn off indicator STOP
①
.
3. Press START
⑨
to restart the work, or to resume the work from an interruption.
4. Pressing EMERGENCY stop
⑤
when:
4-1. Power ON, machine is in ready or stand-by situation. Follow step 1~3 to restart.
4-2. Band is circled and ready for sewing: Sewing interrupts and stops. Error code E5 shows on sewing machine
panel. Following step 1~2 and go to the sewing machine panel.
(1) Press R (RESET)
⑩
to cut the thread.
(2) Press R (RESET)
⑩
again to remove the defective band.
(3) Follow step 3 to resume the operation.
P14
⑪ ⑫ ⑬ ⑭ ⑮