Siruba ASP-EBJ100, Instruction Book

Page: 16 / 56

※
Caution: a band with wrinkle or rumple may cause quality issue or even damage to the machine.
Part A.
Open the induce plate
①
and supporting roller
②
. Insert the band through. (*1)
Part B.
1. Insert the band onto the table
④ and through the rail ⑥ , adjust the knobs ③ to set the band width.
2. Release the supporting roller
⑤
to allow the band going into the rollers
⑦
. (*2) Check if the band aligns with the
wall
⑧
closely. Then turn on the power. (p.10)
Note: *1: To join bands for feeding, please refer to illustration as below.
*2: It is good enough as long as the front end of the band is clamped. No need to force in.
FEEDING THE BAND
【
Part A
】 【
Part B
】


 
①
②


 
③
④
⑧
⑥
⑤
⑦
Join the band with tape or glue. Do not
apply staple or any other hard material.
P6