Siruba ASP-EBJ100, Instruction Book

Page: 14 / 56

1. Setting Button
CONTROL PANEL
①
⑩ ⑥ ⑤
② ③ ④ ⑨
⑦ ⑧
重疊量
LAPPING SIZE
Item Description
①
POWER Switch To turn on/off the power
②
START (green)
1. To start the work cycle (Auto Mode) (p.14)
2. To start work cycle continuously. (p.15)
3. In Auto mode, to run one band circling move. (p.23)
③
Stop (yellow)
1. To stop the machine. (p.15)
2. To complete one work cycle only (p.15)
④
RESET (blue)
1. To offset the error alarm.
2. Press for 3 seconds to reset the band starting position.
3. To control Presser Foot when only sewing machine works alone.
⑤
EMERGENCY (red)
Press to stop the machine immediately for safety issue. Rotate the switch to release.
(p.15)
⑥
LENGTH To set the length of the finished product (p.13)
⑦
RESUME To resume the work after threading interruption
⑧
COUNTER
1. To set the target production amount.
2. To count the number of production.
3. Applicable as counter for under thread.
※
1
⑨
COUNT RESET To reset the counter value to
“
0
＂
. (p.21)
⑩
OVERLAP To set the overlapping area. Value
“
5
＂
as reference position. (p.13, 16, 17, 18)
※
1: to set the consumption of under thread as a service reminder.
P4