Siruba ASP-EBJ100, Instruction Book

Page: 12 / 56

※
For safety issue, we strongly advise to have 2 technicians work together to install.
1. Unscrew screws
①
, and move the Band Feeding Detector
②
outward. (move with caution, do not damage the
wire of the detector)
2. Install Band Feeder System
④
onto the table, matching to the position
⑤
.
5. Check the height of the Auto Kit
Before connecting the power and air, press the band clamper to avoid bumping into other parts
①
.
Push the feeding plate
②
toward the sewing machine until the surface
③
is the even with the needle plate
④
.
When
③
is lower than
④
(more than 0.3mm), or
③
is higher than
④
(more than 0.5mm), loosen the screw
⑤
,
and adjust screw
⑥
for the proper height.
3. Apply screws to join the Band
Feeder System
④
and Band
Feeding Detector
②
.
4. Connect all plugs and make sure
they are secured.
INSTALLATION

④
④
① ⑤
③
②
①
②
P2