21
excessively tightening them.
N.B. The blade cover must be clea-ned with
warm water, the equipped detergente or with
neutral detergent (pH 7).
6.2.3 - Cleaning the sliceguard
(
Fig. n°50)
To remove the sliceguard simply grasp the
handgrip (1) and pull up so that the two pins
unhook (2), and then extract the sliceguard.
At this point clean the sliceguard with warm
water, the equipped detergent or with neutral
detergent (pH 7).
6.2.4 - Cleaning the sharpener (Fig. n°51 - 52)
To clean the sharpener it is necessary to adhere
to the following instructions:
1. lift (a) the sharpener up to the top;
2.
3.
loosen the knob (1);
lift (b) the cup (2) and extract it so
that the
knob (1) passes through the
larger opening in
the cup (2);
4. rub the grinders with a brush, while
cleaning the other components with
warm
water, the equipped detergent
or with neutral
detergent (pH 7).
Fig. n°50
Fig. n°51
Fig. n°52
6.3 - SLIDE GUIDES LUBRICATION
The slide guides on the carriage (1-2) must be
lubricated periodically with the equipped oil (a).
(Fig. n°53)
a
1
2
Fig. n°53
2
1
b
1
2
a
6.screw the two knobs (e) without
