13
4.2 - SAFETY DEVICES INSTALLED ON THE MACHINE
4.2.1 - Mechanical safety
As far as mechanical safety is concerned, the slicer described in this manual responds to:
-
UL 763
machine directives;
-
the
CSA 22.2
norm.
4.2.2 - Electrical safety
As far as electrical safety is concerned, the slicer described in this manual responds to:
-
the
UL 763
norms;
-
the
CSA 22.2
norms.
The slicer is therefore provided with:
-
As far as hygienic safety is concerned
The slicer
described in this manual re-sponds to
NSF
Standard 51
.
-
A relay in the control circuit, that re-quires the
machine to start up again
in case of an
accidental loss of electri-city (
Fig. n°31
).
Safety is made possible by the:
-
Thickness gauge plane
-
(
Fig. n°30 ref. n°1
);
-
Ring
(
Fig. n°30 ref. n°2
);
-
sharpener
(
Fig. n°30 ref. n°3
);
-
Goods presser
(
Fig. n°30 ref. n°4
);
-
Goods presser handgrip
(
Fig. n°30 ref. n°5
);
-
handguard
(
Fig. n°30 ref. n°6
);
-
Trolley transported only when thick
ness
gauge plane is at “0”, at the end of the run
and towards operator side.
Relay in
circuit
Fig. n°31
6
4
1
3
2
5
Fig. n°30
