SIP STAR 850/26 T, Instruction For Work, Page: 102 / 245

STAR
9
1.3 Technical data
Type STAR 850/26 T
Working width - max. 8,300 m
Working width - min. 7,240 m
Transport width 2,990 m
Machine length 5,820 m
Transport height with
protections
3,990 m
Transport height with folded
protections
3,200 m
Transportspeed 40 km/h
Number of rotors 2
No. of double tines per arm
(machine)
4 (104)
No. Of arms per rotor 13
Depositing direction central swath
Tyres on rotor chassis
16 x 6,50 – 8
4 Ply
Tyres on chassis 10,0 / 75 – 15,3
Tyre pressure on rotor
chassis
2,0 bar
Tyre pressure on chassis 3,0 bar
P.T.O. shaft rotations 540 (rpm)
Optimum kardan shaft
rotations
400 - 500 (rpm)
Tractor power - min. 40 kW (55 PS)
Rotor diameter 3,55 m
Weight 2040 kg
P.T.O.shaft clutch – right rotor 900 Nm
P.T.O.shaft clutch – left rotor 900 Nm
Lights serial
Max. allowed speed
(folded shields)
40 km/h
Max. allowed speed
(without folded shields)
30 km/h
Noise level below 70 dB.
2. Preparing
2.1 Special safety instructions
– When performing check up,
maintenance repair and mount works
always switch off the P.T.O.shaft.
Switch off the engine and pull out the
ignition key. Secure tractor against
movements.
–
Maximum number of rotations is
540 rpm.
–
Nobody is allowed to stay between the
tractor and the machine when lifting or
lowering the swather with tractor
hydraulics.
–
Make sure nobody is in the danger area
of the swather before switching on the
P.T.O. shaft. High injury risk!
–
Pay attention to use protections
according to regulations when working
or driving on the road. Mount the light
equipment and check its functioning.
– Never leave the driver seat during
working.
–
Maximum P.T.O. shaft rotation of the swather is 540
rpm.
–
Tractor must have three hydraulic connections, one
for single circuit and two for parallel circuit.
–
Electric connection for lights.
2.2 Attaching to the tractor
–
When attaching the swather make sure
nobody is between the tractor and the
swather.
4
1
1
3
2