SIP SILVERCUT DISC 300 TS FC, Instruction For Work

Page: 95 / 138

Instruction for work
2
Prologue
Dear buyer!
We thank you for your confidence toward our products,
shown by choosing our machine.
Our dealer informed you at delivery of the machine
about proper use, maintenance and setting.
This first information is no substitute for present
instructions for use.
Present instructions for use, informs you most
detailed about every single action which must bet
aken, from first start of the machine itself, proper and
safe use, over to the maintenance.
Instructions are divided in single chapters with text
and illustrations, explaning practical course of every
single step during use of machine.
Due to upper facts please read carefully these
instructions, before you start using the machine and
take into consideration all security regulations.
Important!
To avoid accidents and for acheiving optimal
working - capacities of the machine, any kind of
tecnical changes without strict concordance from
the side of producer is strictly forbidden. In such a
manner also the machine must be used
exsclusively according to from SIP prescribed
conditions.
This symbol should attract your attention
at security informations contained in these
instructions for use.
This symbol is to be found on different
spots in these informations, showing at
special procedure informations which must
be specially considered during the use of
machine.
Ordering of spare parts
GB
Type: Type of machine
Machine no.: Machine Number
Year of constr.: Year of production
Weight: Machine weight
Designation of type
Machine number
Year of production
When ordering spare parts don't forget to write down
the exact type of the machine, serial Number of the
machine and year of production.
All these data are to be found on the factory plate
which is fixed on the machine.
In order to keep these very important data always at
hand, we advise you to write them into above index.
Spare parts can be ordered at your authorised
service provider and sales representative for SIP
machines.
Imitations and copies of parts, especially consumable
parts, are not suitable even though they might appear
to be! The quality of materials cannot be verified
properly with visual inspection alone. For this reason,
caution should be practised with low-priced offers and
copies!
That's why we say, order better immediatelly
ORIGINAL S I P SPARE PARTS!