Sinterit LISA PRO User Manual | 38
1. After pressing the SINTERIT ATEX VACUUM CLEANER
button the cleaning process of the printer will start.
2. Check that the way of the Recoater is not obstructed and
press the DONE button.
3. The Print Bed will be lowered and the Recoater will set up
between the Beds.
BACK
DONE
CLEANING STEP 4/9
Cleaning the Print Bed and Feed Bed
Make sure thah the way of the recoater
is not obstructed
Check the Recoater’s path.
Print bed
•
Feed bed
•
Recoater
•
CLEANING STEP 4/9
Please wait while
Recoater and Beds get positioned...
Positioning...
Beds and Recoater’s positioning screen.
View of the Print Chamber after the positioning
of Beds and Recoater.
4. During the positioning process, you can prepare the necessary devices: PHS or ATEX Vacuum Cleaner with Powder
Separator.
5. Prepare the devices according to their instructions (We recommend to read the full user manuals available with your
Sinterit device or at www.sinterit.com/support-page).
6.
Place an Antistatic hose with a suitable nozzle (either ATEX
Vacuum Cleaner, Powder Separator or PHS) in the Print
chamber and clean all components, especially the Print
Bed and Feed Bed.
Keep the nozzle just above the powder surface.
7. After cleaning, continue by pressing the DONE button.
BACK
DONE
CLEANING STEP 6/9
Cleaning the Feed and Print Bed
Remove the remaining powder from
the Feed and Print Bed
The screen of the cleaning Print chamber.
Cleaning with PHS:
Use the Sinterit PHS and remove all powder
from the Print Chamber.
Use the appropriate nozzle for Suction Handle
to remove the powder.
