Sinterit LISA PRO User Manual | 27
System Volume Information/
FileName_01.scode
FileName_02.scode
FileName_03.scode
BACK
NEXT
PREPARATION STEP 1/9
sample.scode
Expected print time: 2h 23m
Material: PA12 Smooth
Select the file to print.
Basic information after loading
the file to the printer screen
13. Check that the way of the Recoater
30
is not obstructed. If
not, confirm with the “DONE” button. The Recoater and the
Beds
28
,
29
will be homing:
•
The Recoater
30
will be positioned over the Overflow Bin
gap,
•
Print Bed
29
will level with the Print Chamber,
•
Feed Bed
28
will be set to a height corresponding to the
volume of the powder for printing needed.
BACK
DONE
PREPARATION STEP 2/9
sample.scode
Positioning Beds for printing
Make sure that the way of the Recoater
is not obstructed
Check the Recoater’s path.
Print bed
•
Feed bed
•
Recoater
•
PREPARATION STEP 2/9
Please wait while
Recoater and Beds get positioned...
Homing...
28
29
30
Beds and Recoater’s homing screen.
View of the Print Chamber after the positioning
of Beds and Recoater.
14. Prepare the IO Box. After positioning the Beds and Recoater,
insert the IO Box into the Print Chamber as the presented
opposite.
15.
We recommend first to insert the folded IO Box into the
Print Chamber and then spread them out to the width of the
Print Chamber. Be careful of the elements inside the Print
Chamber and on the Lid.
•
The IO Box allows you to pour the powder cleanly into the
Feed Bed. Other elements of the Print Chamber (e.g. the
Pyrometer Window Module, the Recoater guide bars) will
be clean and the start of the printing will be faster.
Feed Bed
Print Bed
Correct position of the elements
of the IO Box to pour the powder into the Feed Bed.
