Sinterit LISA PRO User Manual | 22
2. MOUNT THE LASER PROTE-
CTIVE GLASS MODULE
Slide the metal tabs of the Laser
Protective Glass module into the
holders located in the middle of the
Lid.
Press the gasket gently. After obtaining
the perfect fit, screw the two Quick
release nuts on to the visible screws.
Correct placement of the Laser Protective Glass
on the Heating module.
3. CLOSE THE HEATING
MODULE
Join the Heating module with the Lid
using the metal Split pin.
Clean the Laser Protective Glass one
more time from any finger marks or
stains if present.
Correct closing of the Heating module.
C. CONNECTING THE PRINTER TO WI-FI NETWORK
1. TURN ON THE PRINTER
AGAIN
Switch the Power switch (from “0” to
“1”) and next place the Ignition key in
the Key switch and turn it clockwise at
a quarter of a turn.
Please wait until the main menu with
four buttons appears on the LCD
screen (it takes about 20 seconds).
2. FIND THE WI-FI BUTTON
To connect to the Wi-Fi network, press
the CONTROL PANEL button. Next one
MORE OPTIONS button and then the
WI-FI button.
3. CONNECT TO YOUR WI-Fi
NETWORK
Find the network you want to connect
to and click on its name. Enter your
password if necessary and press OK.
CONTROL
PANEL
START
NEW PRINT
UNLOCK LID/
OVERFLOW
CLEAN
PRINTER
SYSTEM
INFO
MATERIAL
CHANGE
BACK
ADVANCED
MODE
WI-FI
COPY LOGS
TO USB
BACK
MOTORS
MORE
OPTIONS
CAMERA VIEW
FOR 10S
1
3
2
Step by step connection to Wi-Fi.
