Sinterit LISA PRO User Manual | 19
4. INSTALL THE REMOVABLE
FRONT PANEL
Holding the Removable Front Panel
1
parallel to the printer, mount it using
the four Magnetic fasteners
16
at the
front.
After installing the Removeable Front
Panel, check that each of the four
Magnetic fasteners is connected (pull
gently towards you).
Correct mounting of the Removeable Front Panel
with the Magnetic fasteners.
5. CONNECT THE POWER
CABLE AND TURN ON THE
PRINTER
Remove the Power cable
H
from the
STARTUP BOX. Connect the Power
cable to the printer’s Power socket
14
and then to the power supply.
Switch the Power switch (from “0”
to “1”) located on the left side of the
printer
15
.
14 15
STARTUP BOX
H
The Power socket and the Power switch
are located on the left side of the printer.
6. CHECK THE SAFETY BUTTON
Check whether the Safety button (red
button on the right side of the printer)
10
is out. If not, rotate the black flange
of the button clockwise at a quarter of
a turn.
EM
ERGENCY
S T O P
Unlocking Emergency Stop Button.
7. TURN THE PRINTER ON
WITH THE IGNITION KEY
Place the Ignition key
I
in the Key slot
9
and turn it clockwise at a quarter of
a turn.
Please wait until the main menu with
four buttons appears on the LCD
screen (it takes about 20 seconds).
Remember to register your printer
and remove the sticker from the
screen.
STARTUP BOX
9
10
I
The Safety Button and Key slot
are located on the right side of the printer.
