MX575A/B DGPS Compass
61
9
This line indicates the status of the altitude aiding feature
10
This line indicates the threshold of estimated differential performance that allows
the green DGPS LED to illuminate (on the Mini MAX only)
11
This line indicates the current elevation mask cutoff angle, in degrees
12
This line indicates the current seed position used for startup, in decimal degrees
13
This line indicates the current status of the AIR mode
14
This line indicates the current frequency of the L-band receiver
15
This line indicates the current maximum acceptable differential age in seconds
When issuing this command with the optional ‘,subset’ data field (without
the square brackets), a one-line response is provided. The subset field may
be either CONF or GP.
When CONF is specified for ‘subset’, the following response is provided.
$>JSHOW,CONF,N,0.0,10.0,5,A,60W
This response is summarized in the following table.
Message
Component
Description
$>JSHOW,CONF
Message header
N
N
‘N’ indicates no altitude aiding
0.0
‘0.0’ indicates the aiding value, if specified (either specified
height or PDOP threshold)
10.0
Residual limit for the $JLIMIT command
5
Elevation mask cutoff angle, in degrees
A
AIR mode indication
60
Maximum acceptable age of correction data in seconds
