MX575A/B DGPS Compass
60
Sentence Type: $JSHOW
Description:
Command to show its current configuration.
This command is used to poll the MX575 receiver for its current configuration.
This command has the following structure.
$
JSHOW[,subset] <CR><LF>
Using the
$JSHOW
command without the optional ‘,subset’ field will
provide a complete response from the receiver. An example of this
response follows.
$>JSHOW,BAUD,9600 (1)
$>JSHOW,BAUD,9600,OTHER (2)
$>JSHOW,ASC,GPGGA,1.0,OTHER (3)
$>JSHOW,ASC,GPVTG,1.0,OTHER (4)
$>JSHOW,ASC,GPGSV,1.0,OTHER (5)
$>JSHOW,ASC,GPGST,1.0,OTHER (6)
$>JSHOW,ASC,D1,1,OTHER (7)
$>JSHOW,DIFF,WAAS (8)
$>JSHOW,ALT,NEVER (9)
$>JSHOW,LIMIT,10.0 (10)
$>JSHOW,MASK,5 (11)
$>JSHOW,POS,51.0,-114.0 (12)
$>JSHOW,AIR,AUTO,OFF (13)
$>JSHOW,FREQ,1575.4200,250 (14)
$>JSHOW,AGE,1800 (15)
This example response is summarized in the following table.
Line
Description
1
This line indicates that the current port is set to a baud rate of 9600
2
This line indicates that the other port is set to a baud rate of 9600
3
This line indicates that GPGGA is output at a rate of 1 Hz from the other port
4
This line indicates that GPVTG is output at a rate of 1 Hz from the other port
5
This line indicates that the GPGSV is output at a rate of 1 Hz from the other port
6
This line indicates that GPGST is output at a rate of 1 Hz from the other port
7
This line indicates that D1 is output at a rate of 1 Hz from the other port
8
This line indicates that the current differential mode is WAAS
