MX575A/B DGPS Compass
50
(13)
PCSI
- Beacon Status Message
This message contains a variety of information relating to the status of Beacon
engine inside the MX575. The $PCSI,1 output message from the SBX beacon
module is intelligently routed through the MX575 to the port from which the
$PCSI,1 message was requested.
$PCSI,CS0,PXXX-Y.YYY,SN,fff.f,M,ddd,R,SS,SNR,MTP,Q,ID,H,T
1 2 3 4 5 6 7 8 9 10 1112 1314
Notes: 1 ---- Channel 0
2 ---- Resident SBX-3 firmware version
3 ---- SBX-3 receiver serial number
4 ---- Channel 0 current frequency
5 ---- Frequency Mode (‘A’ - Auto or ‘M’ - Manual)
6 ---- MSK bit rate
7 ---- RTCM rate
8 ---- Signal strength
9 ---- Signal to noise ratio
10 ---
Message throughput
11 --- Quality number {0-25} - number of successive good 30 bit
RTCM words received
12 --- Beacon ID to which the receiver’s primary channel is tuned
13 --- Health of the tuned beacon [0-7]
14 --- $PCSI,1 status output period {0-99}
