MX575A/B DGPS Compass
7
2.2 Installation Procedure
2.2.1 Mounting
The MX575 may be mounted with either the fixed-base or pole-mounting base.
Both mounts are supplied with the system.
The fixed base allows you to mount the MX575 on horizontal flat surfaces, such as
radar platforms. The pole mount is designed for use with 1”-14TPI threaded
mounts, such as pole and rail mounts.
Note: Installations that use the pole mount require the use of the supplied hexagonal jam nut
and flat washer in order to mechanically couple the MX575 system to the pole mount with less
stress on the threads. If the nut/washer combination is not used, failure of the pole mounting
base could occur, which may damage the MX575. Any such damage to the MX575
system
resulting from not using the nut / washer combination is not covered under warranty.
The following figure shows the MX575 mounted with the fixed base.
Figure 3
-
MX575 with Fixed-Mount base
