Electrical connection
BA_M-SHEV_EN_17
www.simon-protec.com
Date: 30.07.2019
Issue: 1.7/ 07.2019
Page 20
4 Electrical connection
Insert the connection cable.
Connect the cables according to the connection plan.
Where applicable, attach the strain relief to the cable
comb using cable ties.
Remove the termination resistors of the SHEV-emer-
gency buttons, smoke detectors and FAS contacts from
the terminals of the control panel and connect them to the
last triggering units.
4.1 230 V AC connection (-x1)
Connect the cables according to the connection plan
Figure 17: M-SHEV-10-AP
Figure 18: M-SHEV
DANGER
The system must be mounted by specialist
personnel (qualified electricians) only. All
relevant national safety regulations and
directives apply to mounting, installation
and commissioning.
Improper mounting can create a risk of elec-
tric shock. All safety regulations must be
complied with. Follow the current assembly
instructions. Wrong mounting can lead to
serious injury.
DANGER
Disconnect the connection cable completely (all-pole)
from the mains. No voltage must be present when con-
necting the M-SHEV!
DANGER
The testing of systems must be carried out in accordance
with the applicable national regulations (in Germany
among others. DIN VDE 0100 Part 600).
Make all necessary preparations for this: e.g. connect the
PE connection to the housing lid.
L1
N
PE
L1
N
PE