Simex SRP-N1186, User Manual

Page: 62 / 64

User manual - METER SRP-N1186
Parameter Description Default value User's value
Desc.
page
Active voltage output configuration (“OUtP” menu)
Omod Active voltage output mode
„0-10” (V)
36
OUtL Display value for 0 V, 1 V or 2 V voltage output 0.000 37
OUtH Display value for 5 V or 10 V voltage output 100.000 37
Lo r Extension of the bottom of the nominal output
range
5.000 (%)
37
Hi r Extension of the top of the nominal output range 5.000 (%) 37
AL Voltage output value on critical exception 22.1 (mA) 38
Display parameters
bri Display brightness bri6 38
Configuration of peaks detection function (“HOLd” menu)
modE Kind of detected changes norm 38
PEA Minimum detected change 0.0 38
timE Maximum time of peak displaying 0.0 38
HdiS The type of displayed value HOLd 39
H r1 Source of relay R1, and LED R1 control rEAL 39
H r2 Source of relay R2, and LED R2 control rEAL 39
HOut Source of current output control rEAL 39
Settings of access to the configuration parameters (“SECu” menu)
A r1
Permission to changes of relay R1 threshold
without of the user password knowledge
on
39
A r2
Permission to changes of relay R2 threshold
without of the user password knowledge
on
39
RS 485 interface configuration (menu “rS”)
Addr Device address 0 39
bAud Baud rate 9.6 39
mbAc Permission to changes of configuration registers on 39
mbtO Maximum delay between received messages 0 40
rESP Additional delay of answer transmission Std 40
Configuration of numerical parameters edition
Edit Numerical parameters edit mode dig 40
62