Simex SRP-N1186, User Manual

Page: 53 / 64

User manual - METER SRP-N1186
Register Write Range Register description
11h Yes 0 ÷ 5
“ CHAr ” parameter in “ InPt ” menu (characteristic type)
0 - linear ; 1 - square; 2 - square root; 3 - user defined; 4 - volume
characteristics of a cylindrical tank in the vertical position; 5 -
volume characteristics of a cylindrical tank in the horizontal position
12h Yes 0 ÷ 5 “ FiLt ” parameter in “ InPt ” menu (measurement filtering rate)
13h Yes 0 ÷ 3
“
Pnt
”parameter in “
InPt
” menu (the copy of 04h register, decimal
point position)
0
- “
0
”;
1
- “
0.0
”;
2
- “
0.00
”;
3
- “
0.000
”
14h Yes see descr.
“ Lo C ” parameter in “ InPt ” menu, no decimal point included – higher
word
15h Yes see descr.
“ Lo C ” parameter in “ InPt ” menu, no decimal point included – lower
word
16h Yes see descr.
“ Hi C ” parameter in “ InPt ” menu, no decimal point included – higher
word
17h Yes see descr.
“
Hi C
” parameter in “
InPt
” menu, no decimal point included – lower
word
18h Yes see descr. “ Lo r ” parameter in “ InPt ” menu, in 0.001% – higher word
19h Yes see descr.
“ Lo r ” parameter in “ InPt ” menu, in 0.001% – lower word
1Ah Yes see descr. “ Hi r ” parameter in “ InPt ” menu, in 0.001% – higher word
1Bh Yes see descr. “ Hi r ” parameter in “ InPt ” menu, in 0.001% – lower word
20h 2 Yes 0 ÷ 199 Device address
21h No 22F2h Device identification code (ID)
22h 3 Yes 0 ÷ 7
“bAud” parameter in “rS” menu (baud rate);
0 - 1200 baud; 1 - 2400 baud; 2 - 4800 baud; 3 - 9600 baud;
4 - 19200 baud; 5 - 38400 baud; 6 - 57600 baud; 7 - 115200 baud
23h 4 Yes 0 ÷ 1
“mbAc” parameter in “rS” menu (permission to write registers via
RS-485 interface); 0 - write denied ; 1 - write allowed
24h Yes see descr.
Parameters of “ SECU ” menu (binary format (0 - „ oFF ”, 1 - „ on ”):
bit 0 - “ A r1 ” parameter; bit 1 - “ A r2 ” parameter
25h Yes 0 ÷ 5
“rESP”
parameter in
“rS”
menu (additional response delay);
0
- no additional delay;
1
- ”
10c
” option;
2
- ”
20c
” option;
3
- ”
50c
” option;
4
- ”
100c
” option;
5
- ”
200c
” option;
27h Yes 0 ÷ 99
“mbtO” parameter in “rS” menu (maximum delay between
received frames); 0 - no delay checking;
1 ÷ 99 - maximum delay expressed in seconds
28h Yes see descr.
“ t h1 ” parameter in “ InPt ” menu, no decimal point included – higher
word
29h Yes see descr.
“ t h1 ” parameter in “ InPt ” menu, no decimal point included – lower
word
2Ah Yes see descr.
“ t h2 ” parameter in “ InPt ” menu, no decimal point included – higher
word
53