Simex SRP-N1186, User Manual

Page: 56 / 64

User manual - METER SRP-N1186
Register Write Range Register description
78h 5 Yes see descr.
The value of „ X ” coordinate of point no. 1 of the user defined
characteristic, expressed in 0.1% – lower word
79h 5 Yes see descr.
The value of „ Y ” coordinate of point no. 1 of the user defined
characteristic, no decimal point included – higher word
7Ah
5
Yes see descr.
The value of „ Y ” coordinate of point no. 1 of the user defined
characteristic, no decimal point included – lower word
7Bh 5 ÷ C2h 5
Further pairs of „ X ” - „ Y ” coordinates of points no. 2 ÷ 19 of the
user defined characteristic
C3h 5 Yes see descr.
The value of „ X ” coordinate of point no. 20 of the user defined
characteristic, expressed in 0.1% – higher word
C4h 5 Yes see descr.
The value of „
X
” coordinate of point
no. 20
of the user defined
characteristic, expressed in 0.1% – lower word
C5h 5 Yes see descr.
The value of „ Y ” coordinate of point no. 20 of the user defined
characteristic, no decimal point included – higher word
C6h 5 Yes see descr.
The value of „ Y ” coordinate of point no. 20 of the user defined
characteristic, no decimal point included – lower word
D0h 1
Yes 0 ÷ 3
“ Omod ” parameter in “ OUtP ” menu (active current output mode)
0 - current output disabled ; 1 - current output enabled with 4 ÷ 20mA
mode; 2 - current output enabled with 0÷20mA mode ;
3 - current output controlled via RS-485 interface
Yes 0 ÷ 2
“
Omod
” parameter in “
OUtP
” menu (passive current output mode)
0
- current output disabled ;
1
- current output enabled with
4 ÷ 20mA
mode;
2
- current output controlled via RS-485 interface
Yes 0 ÷ 5
“ Omod ” parameter in “ OUtP ” menu (active voltege output mode)
0 - voltage output disabled ; 1 - voltage output enabled with 0 ÷5V
mode; 2 - voltage output enabled with 1÷5V mode ; 3 - voltage
output enabled with 0÷10V mode ; 4 - voltage output enabled with
2÷10V mode ; 5 - voltage output controlled via RS-485 interface
D1h 1 Yes see descr.
“ OUtL ” parameter in “ OUtP ” menu, no decimal point included –
higher word
D2h 1 Yes see descr.
“ OUtL ” parameter in “ OUtP ” menu, no decimal point included –
lower word
D3h 1 Yes see descr.
“ OUtH ” parameter in “ OUtP ” menu, no decimal point included –
higher word
D4h
1
Yes see descr.
“ OUtH ” parameter in “ OUtP ” menu, no decimal point included –
lower word
D5h 1
Yes see descr.
“ Lo r ” parameter in “ OUtP ” menu, for active current output and
active voltage output, expressed in 0.001% – higher word
Yes see descr.
“ Lo r ” parameter in “ OUtP ” menu for passive current output,
expressed in 0.001% – higher word
D6h 1 Yes see descr.
“
Lo r
” parameter in “
OUtP
” menu, for active current output and
active voltage output, expressed in 0.001% – lower word
56