Simex SRP-N1186, User Manual

Page: 61 / 64

User manual - METER SRP-N1186
Parameter Description Default value User's value
Desc.
page
toFF Turn off delay of relay R2 0.0 30
unit Unit of “t on” , “toFF” parameters of relay R2 SEC 30
AL Reaction for critical situation of relay R2 oFF 30
Configuration of measurement input (“inPt” menu)
tYPE Input mode „4-20” 31
CHAr Conversion characteristic mode Lin 31
FiLt Filtering ratio 0 31
Pnt Decimal point position 0.0 31
Lo C Minimum displayed value (for nominal range) 000.000 32
Hi C Maximum displayed value (for nominal range) 100.000 32
t h1 Height (length) first part of the tank 00.00 32
t h2 Height (length) second part of the tank 00.00 32
t h3 Height (length) third part of the tank 00.00 32
t d Tank diameter 00.01 32
t Sn Distance between sensor and bottom of the tank 00.00 32
t Sh Height of the sensor 20.00 32
Lo r Extension of the bottom of the nominal input range 5.000 (%) 35
Hi r Extension of the top of the nominal input range 5.000 (%) 35
Active current output configuration (“OUtP” menu)
Omod Active current output mode
„0-20” (mA)
36
OUtL Display value for 0 mA or 4 mA current output 0.000 37
OUtH Display value for 20 mA current output 100.000 37
Lo r Extension of the bottom of the nominal output
range
5.000 (%)
37
Hi r Extension of the top of the nominal output range 5.000 (%) 37
AL Current output value on critical exception 22.1 (mA) 38
Passive current output configuration (“OUtP” menu)
Omod Passive current output mode
„4-20” (mA)
36
OUtL Display value for 4 mA current output 0.000 37
OUtH Display value for 20 mA current output 100.000 37
Lo r Extension of the bottom of the nominal output
range
5.000 (%)
37
Hi r Extension of the top of the nominal output range 5.000 (%) 37
AL Current output value on critical exception 22.1 (mA) 38
61