Simex SRP-946, User Manual

Page: 62 / 62

User manual - METER SRP-946
Parameter Description Default value User's value
Desc.
page
modE Kind of detected changes norm 36
PEA Minimum detected change 0.0 36
timE Maximum time of peak displaying 0.0 36
HdiS The type of displayed value HOLd 37
H r1 Source of relay R1, and LED R1 control rEAL 37
H r2 Source of relay R2, and LED R2 control rEAL 37
H r3 Source of relay R3, and LED R3 control rEAL 37
H r4 Source of relay R4, and LED R4 control rEAL 37
HOUt Source of current output control rEAL 37
Settings of access to the configuration parameters (“SECu” menu)
A r1
Permission to changes of relay R1 threshold
without of the user password knowledge
on
37
A r2
Permission to changes of relay R2 threshold
without of the user password knowledge
on
37
A r3
Permission to changes of relay R3 threshold
without of the user password knowledge
on
37
A r4
Permission to changes of relay R4 threshold
without of the user password knowledge
on
37
RS 485 interface configuration (menu “rS”)
Addr Device address 0 37
bAud Baud rate 9.6 37
mbAc Permission to changes of configuration registers on 37
mbtO Maximum delay between received messages 0 38
rESP Additional delay of answer transmission Std 38
Configuration of numerical parameters edition
Edit Numerical parameters edit mode dig 38
62