Simex SRP-946, User Manual

Page: 53 / 62

User manual - METER SRP-946
Register Write Range Register description
42h Yes 0 ÷ 999
“toFF” parameter in “rEL1” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 43h)
43h Yes 0 ÷ 1
“unit” parameter in “rEL1” menu:
0 - seconds; 1 - minutes
44h Yes 0 ÷ 2 “AL” parameter in “rEL1” menu: 0 - no changes; 1 - on; 2 - off
45h Yes see descr.
“ SEt2 ” parameter in “ rEL1 ” menu, no decimal point included –
higher word
46h Yes see descr.
“ SEt2 ” parameter in “ rEL1 ” menu, no decimal point included –
lower word
47h Yes see descr.
“ SEtP ” parameter in “ rEL2 ” menu, no decimal point included –
higher word
48h Yes see descr.
“ SEtP ” parameter in “ rEL2 ” menu, no decimal point included – lower
word
49h Yes see descr.
“ HySt ” parameter in “ rEL2 ” menu, no decimal point included –
higher word
4Ah Yes see descr.
“
HySt
” parameter in “
rEL2
” menu, no decimal point included –
lower word
4Bh Yes 0 ÷ 5
“ modE ” parameter in “ rEL2 ” menu:
0
- “
noAC
” mode;
1
- “
on
” mode;
2
- “
oFF
” mode;
3
- “
in
” mode;
4
- “
out
” mode;
5
- “
modb
” mode
4Ch Yes 0 ÷ 999
“t on” parameter in “rEL2” menu, expressed in tenth of seconds or
tenth of minutes depend on “unit” parameter - register no. 4Eh)
4Dh Yes 0 ÷ 999
“toFF” parameter in “rEL2” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 4Eh)
4Eh Yes 0 ÷ 1
“unit”
parameter in
“rEL2”
menu:
0 - seconds; 1 - minutes
4Fh Yes 0 ÷ 2 “AL” parameter in “rEL2” menu: 0 - no changes; 1 - on; 2 - off
50h Yes see descr.
“ SEt2 ” parameter in “ rEL2 ” menu, no decimal point included –
higher word
51h Yes see descr.
“ SEt2 ” parameter in “ rEL2 ” menu, no decimal point included –
lower word
52h Yes see descr.
“ SEtP ” parameter in “ rEL3 ” menu, no decimal point included –
higher word
53h Yes see descr.
“ SEtP ” parameter in “ rEL3 ” menu, no decimal point included – lower
word
54h Yes see descr.
“ HySt ” parameter in “ rEL3 ” menu, no decimal point included –
higher word
55h Yes see descr.
“ HySt ” parameter in “ rEL3 ” menu, no decimal point included –
lower word
56h Yes 0 ÷ 5
“
modE
” parameter in “
rEL3
” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4
- “
out
” mode;
5
- “
modb
” mode
53