Simex SRP-946, User Manual

Page: 54 / 62

User manual - METER SRP-946
Register Write Range Register description
57h Yes 0 ÷ 999
“t on” parameter in “rEL3” menu, expressed in tenth of seconds or
tenth of minutes depend on “unit” parameter - register no. 59h)
58h Yes 0 ÷ 999
“toFF” parameter in “rEL3” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 59h)
59h Yes 0 ÷ 1
“unit” parameter in “rEL3” menu:
0 - seconds; 1 - minutes
5Ah Yes 0 ÷ 2 “AL” parameter in “rEL3” menu: 0 - no changes; 1 - on; 2 - off
5Bh Yes see descr.
“ SEt2 ” parameter in “ rEL3 ” menu, no decimal point included –
higher word
5Ch Yes see descr.
“ SEt2 ” parameter in “ rEL3 ” menu, no decimal point included –
lower word
5Dh Yes see descr.
“
SEtP
” parameter in “
rEL4
” menu, no decimal point included –
higher word
5Eh Yes see descr.
“ SEtP ” parameter in “ rEL4 ” menu, no decimal point included – lower
word
5Fh Yes see descr.
“ HySt ” parameter in “ rEL4 ” menu, no decimal point included –
higher word
60h Yes see descr.
“ HySt ” parameter in “ rEL4 ” menu, no decimal point included –
lower word
61h Yes 0 ÷ 5
“ modE ” parameter in “ rEL4 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ modb ” mode
62h Yes 0 ÷ 999
“t on” parameter in “rEL4” menu, expressed in tenth of seconds or
tenth of minutes depend on “unit” parameter - register no. 64h)
63h Yes 0 ÷ 999
“toFF”
parameter in
“rEL4”
menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter - register no. 64h)
64h Yes 0 ÷ 1
“unit” parameter in “rEL4” menu:
0 - seconds; 1 - minutes
65h Yes 0 ÷ 2 “AL” parameter in “rEL4” menu: 0 - no changes; 1 - on; 2 - off
66h Yes see descr.
“ SEt2 ” parameter in “ rEL4 ” menu, no decimal point included –
higher word
67h Yes see descr.
“
SEt2
” parameter in “
rEL4
” menu, no decimal point included –
lower word
68h Yes 0 ÷ 1
“ modE ” parameter in “ HOLd ” menu (type of detected changes):
0
- peaks;
1
- drops
69h Yes see descr.
“ PEA ” parameter in “ HOLd ” menu (minimum detectable change, no
decimal point included) – higher word
6Ah Yes see descr.
“ PEA ” parameter in “ HOLd ” menu (minimum detectable change, no
decimal point included) – lower word
6Bh Yes 0 ÷ 199
“
timE
” parameter in “
HOLd
” menu, maximum peaks' (or drops')
display time expressed in seconds
54