Simex SRP-946, User Manual

Page: 59 / 62

User manual - METER SRP-946
5. Read of the registers 1, 2 and 3 in one message (example of reading a number of
registries in one frame):
ADDR FUNC REG H,L COUNT H,L CRC L,H
01 03 00 01 00 03 54 0B
COUNT L - the count of being read registers (max.16)
The answer:
ADDR FUNC BYTE C DATA H1,L1 DATA H2,L2 DATA H3,L3 CRC L,H
01 03 06 00 0A 00 00 00 01 78 B4
DATA H1, L1 - reg. 01h (10 - displayed value ”1.0”),
DATA H2, L2 - reg. 02h (0 - no errors),
DATA H3, L3 - reg. 03h (1 - decimal point position ” 0.0”).
There is no full implementation of the Modbus Protocol in the device. The
functions presented above are available only.
12. DEFAULT AND USER'S SETTINGS LIST
Parameter Description Default value User's value
Desc.
page
Parameters of relay R1 operation (“rEL1” menu)
SEtP Relay R1 threshold 20.000 27
SEt2 Relay R1 second threshold 40.000 27
HYSt Hysteresis of relay R1 0.000 27
modE Operation mode of relay R1 on 27
t on Turn on delay of relay R1 0.0 28
toFF Turn off delay of relay R1 0.0 28
unit
Unit of
“t on”
,
“toFF”
parameters of relay R1
SEC 28
AL Reaction for critical situation of relay R1 oFF 28
Parameters of relay R2 operation (“rEL2” menu)
SEtP Relay R2 threshold 40.000 27
SEt2 Relay R2 second threshold 60.000 27
HYSt Hysteresis of relay R2 0.000 27
modE Operation mode of relay R2 on 27
t on Turn on delay of relay R2 0.0 28
59
i