2
FAULTS FINDING
–
Ignition failure
(fig. 3)
If the burner fails to start the red led will
light up ( ).
To attempt starting it again, the selector
knob must be turned to the position ( )
and released soon after, returning to the
summer (
) or winter (
) position.
If the failure should occur again, call
the authorised technical staff for assi-
stance.
–
Insufficient water
pressure
(fig. 4)
If the red led
“0.5 bar”
intermittently
lights up, the boiler is not functioning. To
restore functioning fill the system until
the green led
“1 bar”
lights up.
If all the leds are off, call the authorised
technical staff.
–
Safety stat interception
(fig. 5)
If the safety stat intercedes the red led
“35°C”
intermittently lights up. To start
the boiler again, turn the selector knob in
the position (
) and then release imme-
diately, returning it to the winter (
) or
summer (
) function.
If the failure should occur again, call
the authorised technical staff for assi-
stance.
SPIA ROSSA
Fig. 3
Fig. 4
RED LED
SPIA ROSSA INTERMITTENTE
IN CONDIZIONE DI SICUREZZA
SPIA VERDE IN CONDIZIONE
DI FUNZIONAMENTO
SPIA ROSSA INTERMITTENTE
Fig. 5
FLASHING RED LED
IN SAFETY CONDITION
GREEN LED IN
OPERATING MODE
FLASHING RED LED
Summary of Contents for Planet Super 4 F.S.
