![background image](http://html1.mh-extra.com/html/silverline/diy-430787/diy-430787_original-instructions-manual_1273604008.webp)
GB
8
Problem
Possible cause
Solution
Tool does not start when switch is in
ON position
No power
Check power supply
Defective switch or tool fault
Return the tool to an authorised Silverline service centre for repair
Blade not cutting correctly
Speed setting too low
Increase speed
Material may not be suitable for the blade installed
Change blade
Material not suitable for tool
For some materials, including hardened metals, compatible blades are unavailable.
Revert to alternative methods of cutting
Blade may be worn
Replace blade
Sanding sheets come loose from
sanding pad during use
Speed set too high
Reduce speed
Too much downward pressure during use
Reduce hand pressure
Hook and loop surface of sanding pad worn out
Replace sanding pad
Unknown mechanical noise
Accessory not securely fitted
Check blade or other accessory is securely tightened
Tool fault
Stop using the tool and return it to an authorised Silverline service centre for repair
Burning smell or other abnormal
operation
Tool fault
Switch the tool OFF and disconnect from power supply immediately. Return it to an
authorised Silverline service centre for repair
Troubleshooting
430787_MANUAL.indd 8
09/05/2017 16:27