Air Impact Butterfly Wrench
797138
7
silverlinetools.com
‘Specification’ if the tool stalls while tightening or the torque produced is insufficient.
WARNING:
Be aware that air tools may hold residual pressure after use . Always bleed air pressure
from the tool after shutting off the air supply .
Accessories
• A range of accessories and consumables, including Coiled Air Hose (269591), Air Filter Regulator
& Lubricator (245014) and Socket Set 3/8” Drive Metric 13pce (868518), is available from your
Silverline stockist . Spare parts can be obtained from toolsparesonline .com
Maintenance
WARNING:
Always disconnect from the air supply and depressurise before cleaning or
carrying out any maintenance .
General inspection
• Regularly check that all the fixing screws are tight
Cleaning
• Keep your tool clean at all times . Dirt and dust will cause internal parts to wear quickly, and
shorten the machine’s service life . Clean the body of your machine with a soft brush, or dry cloth .
If available, use clean, dry, compressed air to blow through the ventilation holes
• Clean the tool casing with a soft damp cloth using a mild detergent . Do not use alcohol, petrol
or strong cleaning agents
• Never use caustic agents to clean plastic parts
Lubrication
• Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant
Daily maintenance procedure:
Disconnect from the air supply, drip 3 droplets of air tool oil into
the air intake. Connect tool to the air supply and run motor briefly (e.g. 2-4 seconds) at low speed
to distribute the oil .
Once a week:
Disconnect the tool from the air supply . Remove the hex screw to open the Oil Port
(3) marked and pour in a few drops of air tool oil . Replace the hex screw and tighten to seal the
oil point. Connect tool to the air supply and run motor briefly (e.g. 2-4 seconds) at low speed to
distribute the oil .
• If the machine is in constant use or used for long periods at a time, a combined filter/lubricator
must be fitted. There must be an air filter fitted at all times
• Use air tool oil . DO NOT UNDER ANY CIRCUMSTANCES USE NORMAL ENGINE OIL
• Failure to comply with the operating and maintenance instructions may invalidate the guarantee
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
797138 MANUAL.indd 7
19/06/2017 16:04
