Silverline 675062, User Manual

Page: 5 / 32

WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING:
User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and
use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use for
the tool in normal working conditions. A poorly maintained, incorrectly assembled,
or misused tool, may produce increased levels of noise and vibration. www.osha.
europa.eu provides information on sound and vibration levels in the workplace that
may be useful to domestic users who use tools for long periods of time.
General Safety Warnings
WARNING Read all safety warnings and all instructions.
Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
WARNING
This appliance is not intended for use by persons (including children)
with reduced, physical or mental capabilities or lack of experience or knowledge
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children must be supervised to
ensure that they do not play with
the appliance.
Save all warnings and instructions for future reference.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust.
c) Keep children and bystanders away while operating a powered tool.
Distractions can cause you to lose control.
2) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a powered tool. Do not use a powered tool while you are tired
or under the influence of drugs, alcohol or medication.
A moment of inattention while operating a powered tool may result in serious
personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off-position when
not operating the tool and make use of other safety features which prevent
unintentional starting.
d) Remove any adjusting key or wrench before turning the powered tool on.
A wrench or a key left attached to a rotating part of the tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewelry or
long hair can be caught in moving parts.
4
GB
x
Nail
Specification
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
Conforms to relevant legislation and safety standards
Do not use with compressed air from high pressure
air cylinders
Do not use on top of scaffolding or ladders
Important safety devices! Ensure correct function, maintain in
accordance with instructions and DO NOT disable!
Environmental Protection
Air tools should not be disposed of with household waste.
They contain traces of oil and other lubricants. Please recycle
where facilities exist. C
heck with your local authority or retailer for
recycling advice.
Specifications
Working pressure ....................................... 4 – 7bar
(60 – 100psi)
Maximum pressure .................................... 7.0bar (100psi)
Air inlet .......................................................
1
⁄
4
" quick
connector
Nail size.................. ......................18 Gauge, 10 – 32mm
Nail capacity................... ............................ 100pce
Weight ........................................................ 1.1kg
Sound and Vibration Information:
Sound pressure L
PA
..................................... 96.0dB(A)
Sound power L
WA
........................................ 83.0dB(A)
Uncertainty K .............................................. 3dB
Weighted vibration ..................................... 2.1m/s
2
Uncertainty K .............................................. 31.57%
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
PDF Compressor Pro