8
GB
Fitting cutting tools
• Ensure cutting tools are correctly and securely fitted and check that wrenches /
adjusters are removed prior to use
• Only use cutting tools recommended for your machine
• Do not attempt to modify cutting tools
• Ensure blades are sharp, in good condition and correctly fitted
• Do not attempt to resharpen blades that are not suitable for resharpening; these may
include specially hardened blades or blades made from hardened alloys typically
containing tungsten
• Blades that can be resharpened should be resharpened only according the blade
manufacturer’s instructions. This may include a limited number of times the blade can
be resharpened
• Sharpened blades should be more thoroughly inspected before use and replaced
immediately if there is any doubt about their condition and suitability for use
• In the event blades encounter an embedded object in use that the blades are not
suitable for, blades should be replaced immediately
Direction of feed
• Always feed work into the blade or cutter against the direction of movement of the
blade or cutter
Beware of heat
• Cutting tools and workpieces may become hot in use. Do not attempt to change tools
until they have been allowed to cool completely
Control dust / swarf
• Do not allow dust or swarf to build up. Sawdust is a fire hazard, and some metal swarf
is explosive
• Be especially careful when cutting wood and metal. Sparks from metal cutting are a
common cause of wood dust fires
• Where possible, use a dust extraction system to ensure a safer working environment
Bench Planer Safety
• Use appropriate respiratory protection:
Use of this tool can generate dust containing
chemicals known to cause cancer, birth defects or other reproductive harm. Some wood
contains preservatives such as copper chromium arsenate (CCA) which can be toxic.
When sanding, drilling, or cutting these materials extra care should be taken to avoid
inhalation and minimise skin contact.
• Use only sharp blades.
Handle the blades very carefully with cut-proof gloves.
• Ensure all cloth, cord, rags, string and similar items are removed from the work
area.
To prevent entanglement in the planer mechanism
• Allow the machine to reach full speed before making contact with the workpiece
and starting cutting
• ALWAYS switch off and allow the blades to come to a complete standstill before
attempting any adjustments, cleaning or carrying out maintenance
• Replace all blades at the same time,
otherwise the resulting imbalance will cause
vibration and shorten the service life of planer and blades
• Do not attempt to perform cutting operations that are not recommended by the
manufacturer.
Stopped cuts, recesses, tenons, moulds or planning of severely bowed
wood if not permitted with this tool.
• Do not use the planer if it has not been fixed to a secure work surface.
Without
sufficient fixing the bench planer may move abruptly during operation potentially
causing severe injury to the operator.
• Always keep the push-stick next to the infeed table during planning operations.
Use the push-stick to feed the workpiece, when in close proximity to the blade and
when the workpiece is less than 75mm thick.
Accessories (not shown):
• Vibration Dampeners x 4
Intended Use
Mains-powered bench-mounted planer with adjustable fence for planing stock up to
155mm wide. For light duty wood planing tasks only.
Unpacking Your Tool
• Carefully unpack and inspect your new tool. Familiarise yourself with all its features
and functions
• Ensure that all parts of the tool are present and in good condition. If any parts are
missing or damaged, have such parts replaced before attempting to use this tool
Before Use
WARNING:
Ensure the tool is disconnected from the power supply before attaching or
changing any accessories, or making any adjustments.
Bench mounting
1. Push-fit the Vibration Dampeners to the underside of the Bench Mounting Holes (1)
2. Using the Bench Mounting Holes, secure the bench planer to a sturdy flat work surface
with appropriate fasteners (not provided)
1 Bench Mounting Hole
2 Outfeed Table
3 Blade Drum
4 Infeed Table
5 Blade Cover Holder
6 Blade Cover Securing Hole
7 Cutting Depth Indicator
8 Cutting Depth Adjustment Knob
9 On/Off Switch Box
10 Emergency Stop Button
11 Height Adjustment Securing Hole
12 Drive Belt Cover
13 Bit Holder Storage Mount
14 Fence Bracket Mount
15 Brush Access Hole
16 Dust Extraction Port
17 Securing Knob
18 Coach Bolt
19 Fence Bracket
20 Multi-Wrench
21 Bit Holder
22 Dust Port Adaptor
Dust Port Adaptor
23 Guide Fence
24 Fence Securing Arm
25 Blade Cover
Product Familiarisation
344944_Z1MANPRO2.indd 8
25/01/2017 15:39
