GB
6
Technical Abbreviations Key
Max working Pressure: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16bar/232psi
Temperature range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-20°C to +60°C
Connection type: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EU quick connectors
Hose length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9m
Hose inner diameter:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.5mm
Hose outer diameter:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mm
Hose material: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PVC
Sleeve anchor bolt size:. . . . . . . . . . . . . . . . . . . . . . . . . . . M8 x 40mm, sleeve 10mm OD
Dimensions (L x W x H):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 x 340 x 175mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Specification
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
DO NOT use with compressed gas cylinders!
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools should not be disposed of with household waste. They contain traces of
oil and other lubricants. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.
Original Instructions
psi
Pounds per square inch
cfm
Cubic feet per minute
Ø
Diameter
BSP
British Standard Pipe (thread)
General Safety
Air Device Safety
a) To avoid multiple hazards, read and understand the safety instructions before installing,
operating, repairing, maintaining, changing accessories on or working near this device.
Failure to do so could result in serious bodily injury.
b) Only qualified and trained operators should install, adjust, or use this device.
c) Do not modify this device.
Modifications can reduce the effectiveness of safety measures and
increase the risks to the operator.
d) Do not discard the safety instructions; give them to the operator.
e) Do not use this device if it has been damaged.
f) Air tools and devices shall be inspected periodically to verify that the ratings and
markings required by this part of ISO 11148 are legibly marked on the tool or device
. The
employer/user should contact the manufacturer to obtain a replacement marking labels when
necessary
.
WARNING
: This device is not intended for use by persons (including children) with reduced,
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the device by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the device.
Projectile Hazards
a) Be aware that failure of the workpiece or accessories, or even the device itself, can
generate high-velocity projectiles.
b) Always wear impact-resistant eye protection during operation of this device.
The grade of
protection required should be assessed for each use.
c) For overhead work, wear a safety helmet.
d) The risks to others should also be assessed at this time.
e) Ensure that the workpiece is securely fixed.
Entanglement Hazards
a) Choking, scalping and/or lacerations can occur if loose clothing, personal jewellery,
neckwear, hair or gloves are not kept away from the device and its accessories.
Operating Hazards
a) Use of the device can expose the operator’s hands to hazards, including cuts, abrasions
and heat.
b) Wear suitable gloves to protect hands.
c) Operators and maintenance personnel should be physically able to handle the bulk,
weight and power of the device.
d) Hold the device correctly.
Be ready to counteract normal or sudden movements and have both
hands available.
e) Maintain a balance body position and secure footing.
f) Release the start-and-stop device in the case of an interruption of the energy supply.
g) Use only lubricants recommended by the manufacturer.
h) Personal protective safety glasses should be used.
i) Avoid direct contact with moving parts in order to prevent pinching or cutting of hands or
other body parts.
j) There is a risk of electrostatic discharge if used on plastic and other non-conductive
materials.
Accessory Hazards
a) Avoid direct contact with the inserted tool during and after use, as it can be hot or sharp.
b) Use only sizes and types of accessories and consumables that are recommended by the
manufacturer of this device.
Do not use other types or sizes of accessories or consumables.
Workplace Hazards
a) Slips, trips and falls are major causes of workplace injury.
Be aware of slippery surfaces and
also of trip hazards caused by the air line or hydraulic hose.
b) This device is not intended for use in potentially explosive atmospheres and is not
insulated against contact with electric power.
Dust & Fume Hazards
a) Dust and fumes generated when using this device can cause ill health (for example
cancer, birth defects, asthma and/or dermatitis).
Risk assessment and implementation of
appropriate controls for these hazards are essential.
b) Risk assessment should include dust created by the use of the device and the potential for
disturbing existing dust.
c) Direct the exhaust so as to minimise disturbance of dust in a dust-filled environment.
d) Where dust or fumes are created, the priority should be to control them at the point of
emission.
317338_Manual.indd 6
11/12/2017 12:11
