GB
│
IE
│
NI
│
CY
│
19
■
SKF 2800 B3
Heat protection function
In a case of overheating, the heat protection function switches the appliance off .
This can happen if there is no, or not sufficient, oil or fat in the deep fat fryer or
when solid cooking fats are being melted in the appliance .
When using solid cooking fats, the control and heating element
5
cannot give
off the heat that is generated quickly enough .
If the heat protection function has switched the appliance off, please proceed as
follows:
1) Allow the appliance to cool down .
2) Leave the oil or fat to cool (the fat should just be liquid) .
3) Open the appliance lid
r
by pressing the lid release button
6
.
4) Remove the frying basket
3
.
5) Remove the operating/heating element
5
.
6) Place the operating/heating element
5
in a clean and dry location .
7) Carefully press the reset button
t
on the control and heating element
5
with a small pointed object .
The appliance can now be used again .
