SGI Racks for Silicon Graphics Prism
007-4701-003
51
Both short and tall racks, as shown in Figure 2-14, have front and rear doors that have
keylocks to prevent unauthorized access to the system. The racks also have cable
entry/exit areas at the bottom of the racks. The 39U racks have cable management
hardware in the rear.
Both rack types are mounted on four casters, two of which are swivel casters. The casters
enable the rack to be rolled out of a shipping crate and to its placement at your site.
Warning:
Follow the guidelines in “Safety Measures” on page 11 and Appendix C,
“Installing Rack Systems,” to avoid damage to equipment, injury, or death.
The base of each rack has seismic tie-down attachment points. The base of the tall rack
also has leveling pads.
Figure 2-14
Front Views of Short and Tall Racks
17U rack
39U rack
2
TM
2
TM
