Silicon Graphics Prism, User Manual

Page: 12 / 250

xii 007-4701-003
Figures
Figure 2-7
Front View of the Router Module . . . . . . . . . . . 42
Figure 2-8
Rear View of Router Module . . . . . . . . . . . . 43
Figure 2-9
SGI TP900 Storage Module. . . . . . . . . . . . . 45
Figure 2-10
2Gb SGI TP9100 Storage System . . . . . . . . . . . 47
Figure 2-11
Unit Numbering Within Racks . . . . . . . . . . . 49
Figure 2-12
Optional Slide Rails . . . . . . . . . . . . . . . 50
Figure 2-13
Shelf Rails . . . . . . . . . . . . . . . . . 50
Figure 2-14
Front Views of Short and Tall Racks . . . . . . . . . . 51
Figure 2-15
DM8 Interface Panel and Connectors . . . . . . . . . . 54
Figure 2-16
Keyboard and Mouse Connected via Optional USB Extender . . . 58
Figure 3-1
Two-Module Ring Topology Example . . . . . . . . . 63
Figure 3-2
Three-Module Ring Topology Example . . . . . . . . . 63
Figure 3-3
Four-Module Ring Topology Example . . . . . . . . . 64
Figure 3-4
Minimum Routed Configuration Conceptual Diagram. . . . . 66
Figure 3-5
Module Ordering in Minimum Routed Configuration . . . . . 67
Figure 3-6
Maximum Routed Configuration Conceptual Diagram . . . . 69
Figure 3-7
Module Ordering in Maximum Routed Configuration . . . . . 70
Figure 4-1
Opening the System Cover. . . . . . . . . . . . . 74
Figure 4-2
Removing an Optional Chassis Rail . . . . . . . . . . 76
Figure 4-3
Removing the Lower PCI/PCI-X Support Bracket . . . . . . 77
Figure 4-4
Replacing the Lower PCI/PCI-X Support Bracket . . . . . . 78
Figure 4-5
Replacing the Chassis Rail . . . . . . . . . . . . . 79
Figure 4-6
Closing the System Cover . . . . . . . . . . . . . 80
Figure 4-7
PCI and PCI-X Card Slots in the Base Compute Module . . . . 81
Figure 4-8
Removing the Blanking Plate . . . . . . . . . . . . 84
Figure 4-9
Installing the Card and Retaining Screw . . . . . . . . . 85
Figure 4-10
Removing the Retaining Screw and Extracting the Card . . . . 88
Figure 4-11
Replacing a Blanking Plate . . . . . . . . . . . . . 89
Figure 4-12
Removing the XG2N Graphics Card Bracket . . . . . . . 92
Figure 4-13
Remove XG2N Graphics Board Assembly . . . . . . . . 93
Figure 4-14
Synchronization Cable Connection on Underside of Graphics Board. 94
Figure 4-15
Installing the Graphics Card and Retaining Screws . . . . . . 95
Figure 4-16
Replacing the PCI/PCI-X Support Bracket . . . . . . . . 96