manualshive.com logo in svg

Silicon Graphics Origin 350, User Manual

Share
Download
Silicon Graphics Origin 350 User Manual Download Page 23

About This Guide

007-4566-001

xxiii

You can obtain SGI documentation, release notes, or man pages in the following ways:

•

See the SGI Technical Publications Library at http://docs.sgi.com. Various formats
are available. This library contains the most recent and most comprehensive set of
online books, release notes, man pages, and other information.

•

If it is installed on your SGI system, you can use InfoSearch, an online tool that
provides a more limited set of online books, release notes, and man pages. With an
IRIX system, select

Help

from the Toolchest, and then select

InfoSearch

. Or you can

type

infosearch

 on a command line.

•

You can also view release notes by typing either

grelnotes

 or

relnotes

 on a

command line.

•

You can also view man pages by typing

 man

 <

title

> on a command line. The

following paragraphs provide more information about man pages.

SGI systems include a set of IRIX man pages, formatted in the standard UNIX “man
page” style. Important system configuration files and commands are documented on
man pages. These are found online on the internal system disk (or CD-ROM) and are
displayed using the

man

 command. For example, to display the man page for the

Add_disk

 command, type the following on a command line:

man Add_disk

References in the documentation to these pages include the name of the command and
the section number in which the command is found. For example, “Add_disk(1)” refers
to the

Add_disk

 command and indicates that it is found in section 1 of the IRIX

reference.

For additional information about displaying man pages using the

man

 command, see

man(1)

.

In addition, the

apropos

command locates man pages based on keywords. For example,

to display a list of man pages that describe disks, type the following on a command line:

apropos disk

For information about setting up and using

apropos

, see

apropos(1)

 and

makewhatis(1M).

Summary of Contents for Origin 350



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands