Silicon Graphics Origin 350, User Manual

Page: 11 / 274

007-4566-001 xi
Figures
Figure 1-1
30-amp Single-phase Power Receptacle for North American Sites . 8
Figure 1-2
32-amp Single-phase Power Plug for International Sites . . . . 9
Figure 1-3
Dimensions of Tall Rack Shipping Crate . . . . . . . . 11
Figure 1-4
Dimensions of Short Rack Shipping Crate . . . . . . . . 12
Figure 1-5
Removing a Short Rack from the Shipping Crate . . . . . . 15
Figure 1-6
Removing a Tall Rack from the Shipping Crate. . . . . . . 18
Figure 1-7
Leveling Bolts . . . . . . . . . . . . . . . . 19
Figure 1-8
Seismic Tie-down Attachment Points . . . . . . . . . 20
Figure 1-9
Leveling Bolts . . . . . . . . . . . . . . . . 21
Figure 1-10
Joining Locations . . . . . . . . . . . . . . . 22
Figure 1-11
Location of Table-mounting Feet . . . . . . . . . . . 24
Figure 1-12
Removing the Chassis Rail from the Slide Rail . . . . . . . 28
Figure 1-13
Attaching the Rear Mounting Bracket to the Slide Rail . . . . 29
Figure 1-14
Attaching Chassis Rails to the Module Chassis . . . . . . . 30
Figure 1-15
Mounting Hole Pattern of Rack Vertical Rails . . . . . . . 31
Figure 1-16
Placing the Barnuts on the Rack Rails . . . . . . . . . 33
Figure 1-17
Attaching the Slide Rail to the Rack . . . . . . . . . . 34
Figure 1-18
Installing Clip Nuts in Rack Rails . . . . . . . . . . 35
Figure 1-19
Pressing the Safety Latches . . . . . . . . . . . . 37
Figure 1-20
Securing the Module to the Rack . . . . . . . . . . . 38
Figure 1-21
Releasing the Safety Latches . . . . . . . . . . . . 40
Figure 1-22
Releasing the Slide Latches . . . . . . . . . . . . 41
Figure 1-23
Installing the Shelf Rails in the Rack . . . . . . . . . . 43
Figure 1-24
Securing the Module to the Rack . . . . . . . . . . . 44
Figure 1-25
Cabling a Base Compute Module to a System Expansion Compute
Module . . . . . . . . . . . . . . . . . . 46
Figure 1-26
Cabling Multiple Modules to Each Other . . . . . . . . 47