manualshive.com logo in svg

Silicon Graphics Origin 350, User Manual

Share
Download
Silicon Graphics Origin 350 User Manual Download Page 151

External Components

007-4566-001

125

•

XIO connector LEDs.

The XIO connector has two LEDs. These LEDs are located

to the right of the XIO connector. One LED lights yellow to indicate that both
the compute module and the InfiniteReality graphics pipeline to which the
compute module is connected are powered on. The other LED lights green
when the compute module link to the graphics pipeline is established.

•

NUMAlink connector.

This NUMAlink 3 connector connects the base compute

module to one of the following modules: expansion compute module, NUMAlink
module, PCI expansion module, or MPX module. This connection is made with a
NUMAlink 3 cable at 1.6 GB/s in each direction.

•

NUMAlink 3 LED.

 The NUMAlink 3 connector has two LEDs. These LEDs are

located to the right of the NUMAlink 3 connector. One LED lights yellow to
indicate that the compute module and the module to which it is connected are
powered on. The other LED lights green when the link between the compute
module and the module to which it is connected is established.

•

PCI/PCI-X slots (bus 1, slot 1; bus 1, slot 2; bus 2, slot 1; bus 2, slot 2).

 These slots

are labeled from bottom to top

PCI 1

,

PCI 2

,

PCI 3

, and

PCI 4

. Two of these slots are

on one bus, and two slots are on another. These 64-bit slots can contain 33-MHz and
66-MHz PCI cards, and 66-MHz and 100-MHz PCI-X cards. (For an updated list of
supported cards, see SGI Supportfolio at http://support.sgi.com.) The bottom-most
slot contains an IO9 PCI card in the base compute module.

Note:

If you run PCI and PCI-X cards on the same bus at the same time, the PCI-X

card will run on PCI mode. And if you run cards of different speeds on the same bus,
the highest-speed card will run at the speed of the slower card. For example, if a card
is running at 100 MHz in one slot of a bus, and a card is running at 33 MHz in the
second slot of the same bus, both cards will run at 33 MHz.

The factory-installed serial daughtercard (only available on the base compute module)
provides the following connectors:

•

Two PS/2 ports (keyboard and mouse).

 These ports connect a PS/2 keyboard and

mouse to the system.

•

Serial ports 2, 3, and 4.

 These three DB-9 RS-232/RS-422 serial ports connect serial

devices, such as printers and modems, to the system.

Summary of Contents for Origin 350



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands