manualshive.com logo in svg

Silicon Graphics Origin 350, User Manual

Share
Download
Silicon Graphics Origin 350 User Manual Download Page 22

xxii

007-4566-001

About This Guide

Related Publications

This section lists various information sources and explains how to access them. The
following SGI publications relate to the Origin 350 server system:

•

SGI Origin 350 Server System User’s Guide

(this manual) (hard copy shipped with the

system and available online) (007-4566-00

x

). Use this guide to become acquainted

with your server and to learn how to operate and monitor the server system. In
addition, this guide contains information on installing the server system in a
19-inch rack, cabling the system, and replacing PCI and PCI-X cards, disk drives,
power supplies, DIMMs, and an L1 display.

Warning:

To ensure your safety and protect your system, do not add or replace

any components that this guide does not designate as customer replaceable.
Contact your SGI system support engineer (SSE) to install any hardware
components that are not designated as customer replaceable in this guide.

•

IRIX Admin Software Installation and Licensing Guide

(hard copy shipped with system

and available online) (007-1364-

xxx

). This is the complete reference guide on using

the installation program,

inst

, to install software. For information on using the

Software Manager to install software, see the online

Personal System Administration

Guide

.

•

SGI L1 and L2 Controller Software User’s Guide

(007-3938-00

x

) (hard copy shipped

with system and available online). This guide describes the L1 and L2 controller
functions, commands, and error messages that you may need to operate and
maintain your system.

•

PCI Expansion Module User’s Guide (5.0-V Support and/or 3.3-V Support)
(

007-4499-00

x

). This guide describes the 4U PCI expansion module, which is an

optional module that adds 12 PCI slots (but no processors, or memory, and no IO9
card) to your system.

•

SGI Total Performance 900 Storage System User’s Guide

 (007-4428-00

x

). This guide

describes the SGI TP900 storage module, which provides additional storage to the
Origin 350 server system.

•

SGIconsole Hardware Connectivity Guide

 (007-4340-00

x

) (optional). This guide

describes how to connect an SGIconsole to your Origin 350 server system and other
systems supported by the SGIconsole. You use the SGIconsole to manage and
monitor your graphics systems.

Summary of Contents for Origin 350



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands