manualshive.com logo in svg

Silicon Graphics Origin 350, User Manual

Share
Download
Silicon Graphics Origin 350 User Manual Download Page 182

156

007-4566-001

6: Installing and Removing Customer-replaceable Units

•

Slots and openings on the cabinet and components are provided for ventilation,
reliable operation, and protection from overheating of the product. These slots and
openings must not be blocked or covered. This product should never be placed near
or over a radiator or heat register, or in a built-in installation unless proper
ventilation is provided.

•

This product should be operated with the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local
power company.

•

Do not allow anything to rest on the power cord. Do not locate this product where
people will walk on the cord.

•

Do not use extension cords with your SGI system.

•

Never push objects of any kind into this product through cabinet slots because they
may touch dangerous voltage points or short out parts that could result in a fire or
electric shock.

•

Never spill liquid of any kind on the product.

•

Do not attempt to service this product yourself except as noted in this guide.
Opening or removing covers of internal components may expose you to dangerous
voltage points or other risks. Refer all servicing to qualified service personnel.

•

Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:

•

If the power cord or plug is damaged or frayed.

•

If the product has been exposed to rain, water, or other type of liquid.

•

If the product does not operate normally when the operating instructions are

followed.

Note:

Adjust only those controls that are covered by the operating instructions,

because improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product to
normal condition.

•

If the product has been dropped or if the cabinet has been damaged.

•

If the product exhibits a distinct change in performance, which indicates a need

for service.

Summary of Contents for Origin 350



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands