Silicon Graphics InfiniteStorage 6120, User Manual

Page: 63 / 94

Firmware Update Management
0 0 7 - 5 5 3 3 - 0 0 1
53
3.4.2.1 Windows Environment
Contact SGI Technical Support to obtain a USB stick with the new firmware. Then follow these steps
to update the firmware:
1. Create a USB stick for the code update:
• Insert your 4GB USB stick into your computer.
• In Windows Explorer, right-click on the device with the Volume Name “JANUS_UP” and
select Format from the pop-up menu
(Figure 75)
. Then click the Start button in the Format
screen.
• To copy and extract the code on the USB stick, right-click on the filename and select
Extract Files Here
(Figure 76)
.
2. Insert the USB stick into the back of the controller.
3. At the CLUI prompt, enter command
UPDATE CONTROLLER LOCAL (Figure 77)
4. Upon completion of reboot, login and enter command
SHOW CONTROLLER LOCAL ALL
. Verify
that the firmware version is correct.
5. Repeat the above steps on the other controller. You do not need to back out either controller
during this procedure.
Figure 75. Firmware Update Example Screen (1)
Figure 76. Firmware Update Example Screen (2)
Figure 77. Update Firmware Screen
RAID$ update controller local
Starting upgrade...
Current Janus Linux, skipping Linux install
Installing JANUS code into sgi-v2
Upgrading Janus sgi-v2 opt...
Changing GRUB boot from sgi-v1 to sgi-v2
Done upgrading Janus
unmount: /tmp/usb: device is busy
Broadcast message from root@(none) (Sat Mar 14 13:25:52 2009):
The system is going down for reboot NOW!