Silicon Graphics InfiniteStorage 6120, User Manual

Page: 41 / 94

Configuring the InfiniteStorage 6120
0 0 7 - 5 5 3 3 - 0 0 1
31
SHOW SPARE_POOL <id> ALL_ATTRIBUTES
will display detailed information of the spare
pool
(Figure 40)
.
SHOW SPARE_POOL <id> PHYSICAL_DISKS
will display the list of disks
in the pool.
5. Assign spare pools to storage pools. Enter command:
SET POOL <pool-id> SPARE_POOL <spare-pool-id>
where <pool-id> and <spare-pool-id> are the index names of the storage pool and spare pool,
respectively.
NOTE : Each storage pool must have a spare pool assigned to it. If a storage pool’s
attributes show
Global Spare Pool: UNASSIGNED
, no spare pool will serve this
storage pool.
A message is displayed to indicate whether the spare pool has been designated
(Figure 41)
.
Repeat this step for each storage pool in the system.
6. Use the
SHOW POOL
command to view the new storage pool information
(Figure 42)
.
RAID$ show spare_pool 6 all_attributes
OID: 0x19bc0006
Type: GLOBAL SPARE
Name: 19bc0006
Block Size: 0x200
DiskTimeout(FRT): 10 minutes
Total Capacity: 1409024 MBs
UUID: 0x00
Total Phy Disks 2
RAID$ show spare_pool 6 physical_disk
OID: 0x20b6004e Index: 0x004e
OID: 0x20b7004f Index: 0x004f
Figure 40. Show Spare Pool Example Screen (2)
RAID$ set pool 0 spare_pool 6
POOL 0 OID=0x19b40000 attributes set with STATUS=’Success’
Figure 41. Set Storage Pool to Spare Pool Example Screen
RAID$ show pool 0 all_attributes
OID: 0x19b40000
Type: STORAGE
Name: 0x19b40000
Chunk Size: 64KB (0x80 blocks)
Block Size: 0x200
RAID Type: RAID5
Free Raid5 Capacity: 2752512 MBs
Total Capacity: 3522560 MBs
UUID: 0x00
Global Spare Pool: 0x19bc0006
DiskTimeout(FRT): 10 minutes
Init Policy: NO IO permitted
Figure 42. Show Pool Example Screen
....