Replacing a Disk Module
69
Installing a Replacement Disk Module
To install the replacement disk module, follow these steps:
1.
Touch the new disk module’s antistatic packaging to discharge it and
the drive module. Remove the new disk module from its packaging.
Caution:
The disk module is extremely sensitive to shock and vibration.
Even a slight jar can severely damage it.
2.
On the label on the side of the disk module, write the ID number for the
compartment into which the drive is going; for example, A3.
3.
Engage the disk module’s rail in the chassis rail slot, as shown in
Figure 5-7.
Figure 5-7
Engaging the Disk Module Rail
4.
Engage the disk module’s guide in the chassis guide slot, as shown in
Figure 5-8.
Disk module’s rail
Rail slot
Disk module’s
rail
Rail slot
Deskside
Rack
