68
Chapter 5: Maintaining Disk Modules
Figure 5-6
Removing a Disk Module
Caution:
When removed from the chassis, the disk modules are
extremely sensitive to shock and vibration. Even a slight jar can severely
damage them.
10. If the label on the side of the disk module does not show the ID number
for the compartment from which you removed the drive, write it on the
label; for example, A1.
For the compartment ID numbers, refer to Figure 5-2 or the slot matrix
attached to the storage system when it was installed.
11. Put the failed disk module in an antistatic bag and store it in a place
where it will not be damaged.
Caution:
Before installing a replacement module, wait at least 15
seconds after removing the failed module to allow the SP time to
recognize that the module has been removed. If you insert the
replacement module too soon, the SP may report the replacement
module as defective.
Deskside
Rack
