Silicon Graphics 230, User Manual

Page: 69 / 148

Securing the System
007-4263-001 53
5. Insert the loop part of the locking loop into the slot inside the chassis and push the
locking loop until it snaps into place. Figure 2-30 illustrates the procedure.
Figure 2-30 Installing Locking Loop in its Functional Slot
6. Replace the side panel as described in “Post-installation Instructions” on page 54.
7. To lock the side panel on the system (see “Post-installation Instructions” on page 54
for side panel installation), insert a padlock into the locking loop.
The system itself can be secured in a particular location by using a Kensington locking
device. See Figure 1-2 on page 3 for the location of the Kensington lock slot.
Note: A Kensington locking device is not included with the Silicon Graphics 230 Visual
Workstation.
1
2
2
1
2
2